Coins Certified as of 1/17

My Coin #22106227

1850 $1 MS64

PCGS#: 6937

Owner's Comments

The Buddy Ebsen specimen - slightly finer than the other graded at this level. Completely original and very prooflike. Marvelous electric blue toning compliments areas of brown. Very sharply struck.

Expert Comments

Q. David Bowers: The following narrative, with minor editing, is from my "Silver Dollars & Trade Dollars of the United States: A Complete Encyclopedia" (Wolfeboro, NH: Bowers and Merena Galleries, Inc., 1993).

Coinage Context

Limited production: The production of Liberty Seated silver dollars at the Philadelphia Mint hit an all-time low in 1850. The reason for this is not clear in government records, but I believe the explanations are simple. To expand on the commentary given under 1849, the following seems to be a likely scenario:

The gold dollar, introduced in 1849, was popular in government circles and at the Mint, and saw extensive use by the public. At the same time, the silver dollar was not popular and was widely criticized. The year 1850 saw a tremendous production of gold dollars, amounting to 481,953 at the Philadelphia Mint alone, a quantity far greater than had been made of any Liberty Seated silver dollar. It seems to me that the Treasury was trying to promote the new gold dollar as the coin of choice of this denomination, and to minimize the silver dollar. This would also account, in part, for the very low silver dollar mintages of 1851 and 1852 (although the rising price of silver was an integral part of the equation). The exportation of dollars undoubtedly was a factor as well (see citation under Coinage Context, 1848). However, it is to be remembered that the quantity of silver dollars coined was equal to the amount of bullion specifically deposited in request for them.

In a specific contribution to this book, Dr. Harry Salyards points out that Coinage Laws of the United States gives interesting information concerning silver imports and exports. 1850 was the only year in its immediate time frame in which exports and imports were very nearly equal. Specific figures follow. Exports: 1847: $869,103; 1848: $4,770,419; 1849: $3,432,415; 1850: $2,962,367; 1851: $6,635,839; 1852: $2,600,156; 1853: $2,044,017; 1854: $727,040. Imports: 1847: $2,546,358; 1848: $2,951,529; 1849: $2,582,593; 1850: $2,852,086; 1851: $1,884,413; 1852: $1,846,985; 1853: $1,774,026; 1854: $3,726,623. (Coinage Laws of the United States, 4th Edition, Washington, Government Printing Office, 1894, p. 256. Carothers, Fractional Money, p. 108 gave incorrect information.)

Numismatic Information

Circulated grades: The 1850 dollar begins a decade of rare Liberty Seated dollar issues. Examples in circulated grades are scarce, as the production figure of 7,500 suggests. However, dealer specialists can usually supply examples in VF and EF grades. AU specimens are scarce but not to the extent that the low mintage might imply; often, such pieces are highly publicized when they are offered for sale.
Mint State grades: Mint State coins, when seen, are apt to be nearly fully prooflike and are often mistaken for Proofs. Indeed, they were struck from dies also used to coin Proofs. Such coins are rare at all Mint State grade levels but are extremely so in MS-63 or better. In 1982, Bruce Amspacher stated that he knew of no gems in existence at that time and was aware of just two coins that could be called Mint State. (Article, "Liberty Seated Dollars," in the Monthly Summary, Coin Dealer Newsletter, July-August, 1982, and die description from James C. Gray, letter to the author, October 5, 1992.) High-grade pieces often show diagonal die finish lines on obverse and reverse; these appear as hairlines or brush marks but, unlike these, the finish lines are microscopically raised on the coin surface.


Circulation strikes:

1. Closed 5: Breen-5442. Obverse: With the knob on 5 touching the cusp above, a rare and seldom seen issue. Proofs were also coined from these dies (same as Proof No.1 described below). Most if not all circulation strikes have a die crack which angles through the bottom portion of the 0 in ONE and then into the denticles below the N of ONE. In addition, another die crack begins at the denticles below UNITED, crosses the tops of all six letters of UNITED and angles back into the denticles above the ST in STATES. Also, this die has the diagonal defect in the horizontal stripes, which is clearly shown in John Kroon's article on the 1851 dollars which appeared in Collective Volume III of The Gobrecht Journal. This identical die was used to strike all original 1851 dollars."

2. Open 5: Breen-5443. Obverse: With the knob separate from the cusp, and with repunching at the base of the zero. Prominent die file marks extend slightly upward and to the left from the denticles below 50 in the date. Proofs of the Open 5 variety were coined from this obverse. Possible restrikes (see under Proofs below) have a heavy crack through the base of the date and are exceedingly rare. Proof dies were later used to make circulation strikes, accounting for the prooflike characteristic of circulating pieces.

Dies prepared: Obverse: Unknown; Reverse: Unknown

Circulation strike mintage: 7,500; Delivery figures by month: June: 7,500.

Estimated quantity melted: Unknown

Diameter: 38.10 millimeters Designer: Christian Gobrecht Edge: Reeded
Mintage: 7,500 Weight: 26.73 grams Metal Content: 90% Silver, 10% Copper
Go To Grade
  • 4
  • 6
  • 8
  • 10
  • 12
  • 15
  • 20
  • 25
  • 30
  • 35
  • 40
  • 45
  • 45+
  • 50
  • 50+
  • 53
  • 53+
  • 55
  • 55+
  • 58
  • 58+
  • 60
  • 61
  • 62
  • 62+
  • 63
  • 63+
  • 64

Rarity and Survival Estimates

Grades Survival Estimate Numismatic Rarity Relative Rarity by Type Relative Rarity by Series
All Grades 1,500 R-4.8 13 / 30 TIE 21 / 45 TIE
60 or Better 65 R-8.3 16 / 30 TIE 23 / 45 TIE
65 or Better 0 R-10.1 1 / 30 1 / 45

Condition Census

Pos Grade Thumbnail Pedigree and History
1 MS64 PCGS grade

Bruce Morelan Collection of Mint State Seated Liberty Dollars

1 MS64 PCGS grade

Bel Air Collection

3 MS63+ PCGS grade  
4 MS63 PCGS grade
4 MS63 PCGS grade