1795 1C Plain Edge, BN G6BN Certification #85751853, PCGS #1380

Expert Comments

Ron Guth

By 1795, the cost of making a Large Cent exceeded its face value, thus the government was forced to consider a change.  Their answer was to simply reduce the weight of the coin.  Because the diameter remained the same, the effect of lowering the weight was a much thinner coin.  Making the coin thinner had both negative and positive consequences: 1) the edge was no longer thick enough to receive the edge lettering, and 2) by eliminating the edge lettering, a whole step in the manufacturing process could be avoided, thus speeding up production.

The effect of the change had little or no impact on the public's perception.  The people on the street continued to use and accept the lighter-weight coppers in direct contradiction to their rejection of underweight imitations of British coppers less than a decade earlier.  Perhaps the official nature of the coins and the government's backing of the value was enough to encourage the citizenry to be a little more flexible this time around.  Apparently, it worked, because the weight of the Large Cents remained the same from 1795 to 1857.

Plain edge 1795 Large Cents are considerably more plentiful than the Lettered Edge versions, plus they are more likely to be found in Mint State, and the best examples top out at MS65BN.  The typical Mint State grade is MS63BN.  No Red-Brown or Red 1795 Large Cents are known.


28.00 millimeters
Attributed to Robert Scot
10.89 grams
Metal Content
The United States of America
Pop Higher
Pop Lower
Price Guide
PCGS Population
Auctions - PCGS Graded
Auctions - NGC Graded

Rarity and Survival Estimates

65 or Better 1000 R-5.0 8 / 11 TIE 9 / 12 TIE
All Grades 25 R-9.0 6 / 11 7 / 12
60 or Better 2 R-9.9 2 / 11 TIE 2 / 12 TIE

Condition Census

Pos Grade Thumbnail Pedigree and History
1 MS65BN PCGS grade MS65BN PCGS grade
1 MS65BN PCGS grade
1 MS65BN PCGS grade
4 MS64+BN PCGS grade MS64+BN PCGS grade
4 MS64BN PCGS grade MS64BN PCGS grade