Owner's Comments

Mintage: 12,078,010
Unhubbed Date Obverse Dies: 24
Known Hubbed Date Obverse Dies: 15+ Known

Arrows were added to Seated dimes in 1853 to reflect a weight change to 2.48 grams, down from 2.67 grams. Breen indicates that about 50 pairs of dies were prepared for the Philadelphia mint. Lengthy research of this date has revealed 39 different obverse dies of which 15 have hubbed dates and arrows. The 1853 With Arrow Philadelphia dies saw extensive usage based on the amount of varieties with significant shattering of dies and late die states with retained cuds.

After researching the 1853 With Arrows Seated dimes for many years, it became obvious that a portion of that year''s Philadelphia mintage was accomplished with working dies prepared from a working hub die that had hubbed dates and arrows. On these dimes, there is no movement in the date and arrows devices.

Plate Coin: Fortin 119, Frosty White with a Superb Strike, All Details and Devices Fully Struck, Large Rim Cud from 6:00 - 7:00

Expert Comments

Ron Guth

In 1853, the weight of the Half Dimes, Dimes, Quarter Dollars and Half Dollars was reduced to reflect a rise in the price of silver.  The older coins were already being destroyed in large quantities because their intrinsic value exceeded their face value.  To differentiate the new coins from the old, the Mint placed arrowheads on either side of the date.  This did two things: it made it easy to identify the older coins with just a glance; and it also protected the newer coins from being melted, since they were immediately identifiable as the lower-weight coins.

The mintage of the new 1853 "With Arrows" Dimes was huge (the mintage of 12 million plus coins was at least six times that of any previous mintage of a U.S. Dime).  Presumably, the Mint achieved this milestone by converting old coins to new as fast as it could.

Because of the high mintage, the 1853 Dime with Arrows is a common coin in virtually all grades, especially up through MS-64.  Gems are slightly scarcer, but still obtainable, and it is only in MS-67 and MS-68 that this date becomes a condition rarity.  However, demand from type collectors keeps the price of this issue higher than it would be under normal circumstances.

The finest example certified by PCGS (as of April 2012) is a wonderful MS-68 that features vivid luster and intense toning on both sides (see the image of this remarkable coin above).

PCGS #
4603
Designer
Robert Ball Hughes/Christian Gobrecht
Edge
Reeded
Diameter
17.90 millimeters
Weight
2.48 grams
Mintage
12078010
Metal
90% Silver, 10% Copper
Pop Higher
23
Pop Lower
1207
Region
The United States of America
Price Guide
PCGS Population
Auctions - PCGS Graded
Auctions - NGC Graded

Rarity and Survival Estimates Learn More

Grades
65 or Better 4000 R-4.2 5 / 5 113 / 122 TIE
All Grades 900 R-5.2 5 / 5 119 / 122
60 or Better 130 R-7.7 5 / 5 106 / 122 TIE
65 or Better 4000
All Grades 900
60 or Better 130
65 or Better R-4.2
All Grades R-5.2
60 or Better R-7.7
65 or Better 5 / 5
All Grades 5 / 5
60 or Better 5 / 5
65 or Better 113 / 122 TIE
All Grades 119 / 122
60 or Better 106 / 122 TIE

Condition Census Learn More

Pos Grade Thumbnail Pedigree and History
1 MS68+ PCGS grade  
	PCGS #4603 (MS) 68+

Heritage 3/2005:5462, $57,500 - Bob R. Simpson Collection

2 MS68 PCGS grade PCGS #4603 (MS)     68

High Desert Collection (PCGS Set Registry)

2 MS68 PCGS grade
2 MS68 PCGS grade
5 MS67+ PCGS grade MS67+ PCGS grade
 
	PCGS #4603 (MS) 68+ 
#1 MS68+ PCGS grade

Heritage 3/2005:5462, $57,500 - Bob R. Simpson Collection

PCGS #4603 (MS)     68 #2 MS68 PCGS grade

High Desert Collection (PCGS Set Registry)

#2 MS68 PCGS grade
#2 MS68 PCGS grade
MS67+ PCGS grade #5 MS67+ PCGS grade