1974 50C MS66 Certification #71510295, PCGS #6722
Owner's Comments
Wanted: Upgrade to MS67
- - - - -
Type: Kennedy Half Dollar, Type 3, Copper-Nickel Clad (1971- )
Designer: Gilroy Roberts / Frank Gasparro
Content: 75% Copper, 25% Nickel over a pure Copper center
Weight: 11.30 grams
Diameter: 30.61 millimeters
Edge: Reeded (150 reeds)
Mint: Philadelphia
Production Strikes: 201,596,000
General Type Description: Beginning in 1971, all silver was removed from the Half Dollar, in favor of the same copper-nickel clad alloy that had been in use on Dimes and Quarter Dollars since 1965. Mintages remained low relative to all other denominations, with the result that the Half Dollar was seldom used or seen in circulation (a situation that persists today). Though somewhat lengthy, this series is easy and affordable to collect as either circulation strikes, Proofs, or both. Some dates, such as 1987-P and D, 2001-P, 2002-P and D, and others were not issued for circulation but are available only in Mint sets, adding a bit of a challenge. Major varieties include a 1972 No “FG” and a 1974 Doubled Die Obverse. (Source:: Guth, Ron. PCGS CoinFacts)
Specific Issue Description: The 1974 Kennedy Half Dollar is a very common coin as the Mint struck a little over 200 million examples for circulation. The mintage is also more than double than that of the Denver struck Kennedy Half Dollars from the same year. Only in MS66 condition or higher is the 1974-P considered scarce and any example in this condition or higher is definitely worth setting aside. In MS67 condition it is really scarce with several dozen confirmed. Anything grading higher than MS67 is considered very rare and should definitely be certified. (Source: Hernandez, Jamie. PCGS CoinFacts)
Exemplar Notes: Acquired 2/2016 from Luke's Coins.
Expert Comments
Jaime Hernandez
The 1974 Kennedy Half Dollar is a very common coin as the Mint struck a little over 200 million examples for circulation. The mintage is also more than double than that of the Denver struck Kennedy Half Dollars from the same year. Only in MS66 condition or higher is the 1974-P considered scarce and any example in this condition or higher is definitely worth setting aside. In MS67 condition it is really scarce with several dozen confirmed. Anything grading higher than MS67 is considered very rare and should definitely be certified.
PCGS #
6722
Designer
Gilroy Roberts/Frank Gasparro
Edge
150 Reeds
Diameter
30.61 millimeters
Weight
11.30 grams
Mintage
201596000
Metal
75% Copper, 25% Nickel over a pure Copper center
Pop Higher
74
Pop Lower
850
Region
The United States of America
Price Guide
PCGS Population
Auctions - PCGS Graded
Auctions - NGC Graded
Rarity and Survival Estimates Learn More
| 65 or Better | 40319200 |
| All Grades | 4031920 |
| 60 or Better | 806384 |
| 65 or Better | R-1.0 |
| All Grades | R-1.0 |
| 60 or Better | R-1.2 |
| 65 or Better | 1 / 62 TIE |
| All Grades | 29 / 62 TIE |
| 60 or Better | 54 / 62 |
| 65 or Better | N/A |
| All Grades | N/A |
| 60 or Better | N/A |
Condition Census Learn More
| #1 MS67 CGS grade |
| #1 MS67 CGS grade |
| #1 MS67 CGS grade |
| #1 MS67 CGS grade |
| #1 MS67 CGS grade |
