1977-D 50C MS67 Certification #04420735, PCGS #6732
Owner's Comments
Type: Kennedy Half Dollar, Type 3, Copper-Nickel Clad (1971- )
Designer: Gilroy Roberts / Frank Gasparro
Content: 75% Copper, 25% Nickel over a pure Copper center
Weight: 11.30 grams
Diameter: 30.61 millimeters
Edge: Reeded (150 reeds)
Mint: Denver
Production Strikes: 31,449,106
General Type Description: Beginning in 1971, all silver was removed from the Half Dollar, in favor of the same copper-nickel clad alloy that had been in use on Dimes and Quarter Dollars since 1965. Mintages remained low relative to all other denominations, with the result that the Half Dollar was seldom used or seen in circulation (a situation that persists today). Though somewhat lengthy, this series is easy and affordable to collect as either circulation strikes, Proofs, or both. Some dates, such as 1987-P and D, 2001-P, 2002-P and D, and others were not issued for circulation but are available only in Mint sets, adding a bit of a challenge. Major varieties include a 1972 No “FG” and a 1974 Doubled Die Obverse. (Source:: Guth, Ron. PCGS CoinFacts)
Specific Issue Description: Quality for the Kennedy Half Dollars seems to get better this year as examples of the 1977-D in MS66 and MS67 are much easier to obtain than in previous years. There is even 1 known example graded PCGS MS68. However, known examples in MS66 and higher are still somewhat scarce with less than 200 examples confirmed by PCGS in these grade ranges. Therefore, any example in MS66 or higher is considered a great find. (Source: Hernandez, Jamie. PCGS CoinFacts)
Exemplar Notes: Exhibits light, even toning on both obverse and reverse sides. Encapsulated in an old green holder (OGH), this was acquired 6/2011 from Tim Clough.
Expert Comments
Jaime Hernandez
Quality for the 1977-D Kennedy Half Dollars seems to get better this year. As examples in MS66 and MS67 are much easier to obtain than in previous years. There is even 1 known example graded PCGS MS68. However, known examples in MS66 and higher are still somewhat scarce with less than 200 examples confirmed by PCGS in these grade ranges. Therefore, any example in MS66 or higher is considered a great find.
PCGS #
6732
Designer
Gilroy Roberts/Frank Gasparro
Edge
150 Reeds
Diameter
30.61 millimeters
Weight
11.30 grams
Mintage
31449106
Metal
75% Copper, 25% Nickel over a pure Copper center
Pop Higher
6
Pop Lower
833
Region
The United States of America
Price Guide
PCGS Population
Auctions - PCGS Graded
Auctions - NGC Graded
Rarity and Survival Estimates Learn More
| 65 or Better | 6289821 |
| All Grades | 1257964 |
| 60 or Better | 125796 |
| 65 or Better | R-1.0 |
| All Grades | R-1.0 |
| 60 or Better | R-1.9 |
| 65 or Better | 1 / 62 TIE |
| All Grades | 29 / 62 TIE |
| 60 or Better | 9 / 62 TIE |
| 65 or Better | N/A |
| All Grades | N/A |
| 60 or Better | N/A |

