1981-D 50C MS67 Certification #02788855, PCGS #6740
Owner's Comments
Type: Kennedy Half Dollar, Type 3, Copper-Nickel Clad (1971- )
Designer: Gilroy Roberts / Frank Gasparro
Content: 75% Copper, 25% Nickel over a pure Copper center
Weight: 11.30 grams
Diameter: 30.61 millimeters
Edge: Reeded (150 reeds)
Mint: Denver
Production Strikes: 27,839,533
General Type Description: Beginning in 1971, all silver was removed from the Half Dollar, in favor of the same copper-nickel clad alloy that had been in use on Dimes and Quarter Dollars since 1965. Mintages remained low relative to all other denominations, with the result that the Half Dollar was seldom used or seen in circulation (a situation that persists today). Though somewhat lengthy, this series is easy and affordable to collect as either circulation strikes, Proofs, or both. Some dates, such as 1987-P and D, 2001-P, 2002-P and D, and others were not issued for circulation but are available only in Mint sets, adding a bit of a challenge. Major varieties include a 1972 No “FG” and a 1974 Doubled Die Obverse. (Source:: Guth, Ron. PCGS CoinFacts)
Exemplar Notes: A lustrous all-white superb Gem acquired; one of less than two dozen so graded, with none finer. Acquired 8/2014 via from David Shelton.
Photography/Imaging c/o Todd Pollock, BluCCPhotos.com
PCGS #
6740
Designer
Gilroy Roberts/Frank Gasparro
Edge
150 Reeds
Diameter
30.61 millimeters
Weight
11.30 grams
Mintage
27839533
Metal
75% Copper, 25% Nickel over a pure Copper center
Pop Higher
0
Pop Lower
577
Region
The United States of America
Price Guide
PCGS Population
Auctions - PCGS Graded
Auctions - NGC Graded
Rarity and Survival Estimates Learn More
| 65 or Better | 9743836 |
| All Grades | 974383 |
| 60 or Better | 292315 |
| 65 or Better | R-1.0 |
| All Grades | R-1.1 |
| 60 or Better | R-1.8 |
| 65 or Better | 1 / 62 TIE |
| All Grades | 25 / 62 TIE |
| 60 or Better | 25 / 62 TIE |
| 65 or Better | N/A |
| All Grades | N/A |
| 60 or Better | N/A |
