1992-D 50C MS67 Certification #90027284, PCGS #6762

Owner's Comments

Wanted: Upgrade to MS68 - - - - - Type: Kennedy Half Dollar, Type 3, Copper-Nickel Clad (1971- ) Designer: Gilroy Roberts / Frank Gasparro Content: 75% Copper, 25% Nickel over a pure Copper center Weight: 11.30 grams Diameter: 30.61 millimeters Edge: Reeded (150 reeds) Mint: Denver Production Strikes: 17,000,106 General Type Description: Beginning in 1971, all silver was removed from the Half Dollar, in favor of the same copper-nickel clad alloy that had been in use on Dimes and Quarter Dollars since 1965. Mintages remained low relative to all other denominations, with the result that the Half Dollar was seldom used or seen in circulation (a situation that persists today). Though somewhat lengthy, this series is easy and affordable to collect as either circulation strikes, Proofs, or both. Some dates, such as 1987-P and D, 2001-P, 2002-P and D, and others were not issued for circulation but are available only in Mint sets, adding a bit of a challenge. Major varieties include a 1972 No “FG” and a 1974 Doubled Die Obverse. (Source:: Guth, Ron. PCGS CoinFacts) Exemplar Notes: Graded MS67 with only three graded higher (as of 5/2016), this was acquired 5/2011 from Tim Clough.
PCGS #
6762
Designer
Gilroy Roberts/Frank Gasparro
Edge
150 Reeds
Diameter
30.61 millimeters
Weight
11.30 grams
Mintage
17000106
Metal
75% Copper, 25% Nickel over a pure Copper center
Pop Higher
7
Pop Lower
626
Region
The United States of America
Price Guide
PCGS Population
Auctions - PCGS Graded
Auctions - NGC Graded

Rarity and Survival Estimates Learn More

Grades
65 or Better 8500053 R-1.0 1 / 62 TIE N/A
All Grades 850005 R-1.2 20 / 62 TIE N/A
60 or Better 170001 R-1.9 9 / 62 TIE N/A
65 or Better 8500053
All Grades 850005
60 or Better 170001
65 or Better R-1.0
All Grades R-1.2
60 or Better R-1.9
65 or Better 1 / 62 TIE
All Grades 20 / 62 TIE
60 or Better 9 / 62 TIE
65 or Better N/A
All Grades N/A
60 or Better N/A