1993-D 50C MS67 Certification #13859248, PCGS #6764

Owner's Comments

Wanted: Upgrade to MS68 - - - - - Type: Kennedy Half Dollar, Type 3, Copper-Nickel Clad (1971- ) Designer: Gilroy Roberts / Frank Gasparro Content: 75% Copper, 25% Nickel over a pure Copper center Weight: 11.30 grams Diameter: 30.61 millimeters Edge: Reeded (150 reeds) Mint: Denver Production Strikes: 15,000,006 General Type Description: Beginning in 1971, all silver was removed from the Half Dollar, in favor of the same copper-nickel clad alloy that had been in use on Dimes and Quarter Dollars since 1965. Mintages remained low relative to all other denominations, with the result that the Half Dollar was seldom used or seen in circulation (a situation that persists today). Though somewhat lengthy, this series is easy and affordable to collect as either circulation strikes, Proofs, or both. Some dates, such as 1987-P and D, 2001-P, 2002-P and D, and others were not issued for circulation but are available only in Mint sets, adding a bit of a challenge. Major varieties include a 1972 No “FG” and a 1974 Doubled Die Obverse. (Source:: Guth, Ron. PCGS CoinFacts) Exemplar Notes: Acquired 5/2011 from Tim Clough.
PCGS #
6764
Designer
Gilroy Roberts/Frank Gasparro
Edge
150 Reeds
Diameter
30.61 millimeters
Weight
11.30 grams
Mintage
15000006
Metal
75% Copper, 25% Nickel over a pure Copper center
Pop Higher
3
Pop Lower
431
Region
The United States of America
Price Guide
PCGS Population
Auctions - PCGS Graded
Auctions - NGC Graded

Rarity and Survival Estimates Learn More

Grades
65 or Better 7500003 R-1.0 1 / 62 TIE N/A
All Grades 750000 R-1.3 15 / 62 TIE N/A
60 or Better 150000 R-1.9 9 / 62 TIE N/A
65 or Better 7500003
All Grades 750000
60 or Better 150000
65 or Better R-1.0
All Grades R-1.3
60 or Better R-1.9
65 or Better 1 / 62 TIE
All Grades 15 / 62 TIE
60 or Better 9 / 62 TIE
65 or Better N/A
All Grades N/A
60 or Better N/A