1995-D 50C MS68 Certification #05379389, PCGS #6768

Owner's Comments

Type: Kennedy Half Dollar, Type 3, Copper-Nickel Clad (1971- ) Designer: Gilroy Roberts / Frank Gasparro Content: 75% Copper, 25% Nickel over a pure Copper center Weight: 11.30 grams Diameter: 30.61 millimeters Edge: Reeded (150 reeds) Mint: Denver Production Strikes: 26,288,000 General Type Description: Beginning in 1971, all silver was removed from the Half Dollar, in favor of the same copper-nickel clad alloy that had been in use on Dimes and Quarter Dollars since 1965. Mintages remained low relative to all other denominations, with the result that the Half Dollar was seldom used or seen in circulation (a situation that persists today). Though somewhat lengthy, this series is easy and affordable to collect as either circulation strikes, Proofs, or both. Some dates, such as 1987-P and D, 2001-P, 2002-P and D, and others were not issued for circulation but are available only in Mint sets, adding a bit of a challenge. Major varieties include a 1972 No “FG” and a 1974 Doubled Die Obverse. (Source:: Guth, Ron. PCGS CoinFacts) Specific Issue Description: The 1995-D Kennedy Half Dollar is really common in most grades, as it has a significantly large mintage of over 26 million coins struck. In MS67 condition it becomes scarce but with enough searching, there are probably still thousands of examples out there in bags and rolls. In MS68 condition they are very difficult to come by with less than a few dozen known and none have been confirmed in any higher condition. (Source: Hernandez, Jamie. PCGS CoinFacts) Exemplar Notes: Ex. GRFN (Graham Napier). One of only six graded MS68 with none finer (as of 5/2016), this lustrous superb gem was acquired 9/2013 via Ira & Larry Goldberg. Photography/Imaging c/o Todd Pollock, BluCCPhotos.com

Expert Comments

Jaime Hernandez

The 1995-D Kennedy Half Dollar is really common in most grades, as it has a significantly large mintage of over 26 million coins struck. In MS67 condition it becomes scarce but with enough searching, there are probably still thousands of examples out there in bags and rolls. In MS68 condition they are very difficult to come by with less than a few dozen known and none have been confirmed in any higher condition.  

PCGS #
6768
Designer
Gilroy Roberts/Frank Gasparro
Edge
150 Reeds
Diameter
30.61 millimeters
Weight
11.30 grams
Mintage
26288000
Metal
75% Copper, 25% Nickel over a pure Copper center
Pop Higher
0
Pop Lower
520
Region
The United States of America
Price Guide
PCGS Population
Auctions - PCGS Graded
Auctions - NGC Graded

Rarity and Survival Estimates Learn More

Grades
65 or Better 13144000 R-1.0 1 / 62 TIE N/A
All Grades 1314400 R-1.0 29 / 62 TIE N/A
60 or Better 394320 R-1.7 37 / 62 TIE N/A
65 or Better 13144000
All Grades 1314400
60 or Better 394320
65 or Better R-1.0
All Grades R-1.0
60 or Better R-1.7
65 or Better 1 / 62 TIE
All Grades 29 / 62 TIE
60 or Better 37 / 62 TIE
65 or Better N/A
All Grades N/A
60 or Better N/A